WLAN Pi M4

This is a complete unit, fully assembled, ready to rock out of the box.

What is included

• Raspberry Pi CM4

  • Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

  • 2GB RAM

  • 802.11ac Wi-Fi*

  • Bluetooth 5.0 BLE*

• Mcuzone PoE Carrier Board

  • M.2 slot populated with 1x MediaTek MT7922 Wi-Fi 6E module

  • 2x Internal tri-band antennas (external antenna option available by request)

  • 10/100/1000 Mbps Ethernet (PoE)

  • 1x USB Type-C (Power only)

  • 3x USB Type-A 2.0 ports

  • Micro-SD card slot

• Power input:

  • PoE 802.3af compliant

  • USB Type-C

• Waveshare LCD display & buttons HAT

  • 1.44” LCD display

  • 1x joystick (5-position)

  • 3x pushbuttons, configured as shortcuts

    • A - reachability / LLDP neighbour / eth0 IP info

    • B - hotspot mode trigger

    • C - shutdown / restart

• 32 GB micro SD card imaged with the latest and greatest version of wlanpi OS

• 3D printed PETG case and internal assembly

  • Integrated 1/4” thread (replaceable)

  • 8x M3 mounting threads (for accessories)

What is not included

• Power Adapter

• USB Cable

To avoid discovery disappointment please exercise expectation management by paying special attention to the limitations highlighted below:

• 3x USB 2.0 ports (these are NOT USB 3.0, the Mcuzone carrier board does not support USB 3.0)

• 1x USB Type-C for power only (this port is NOT capable of supporting OTG)

• No internal battery

* WLAN Pi OS disables these interfaces by default, because they interfere with configuration settings within WLAN Pi OS, they can be re-enabled with modifications to the boot config.